Nonius upper part
The element is intended for the installation of the Nonius suspension system, where higher load capacity and fire resistance are required.
This part is used as the upper anchoring element of the Nonius assembly for fixed building structures in a horizontal system. It is manufactured by stamping galvanized sheet metal with a thickness of 1.00 mm. Nonius hangers are used in systems requiring higher load capacity, fire resistance, and buckling strength. The assembly always consists of the upper part, lower part, and a safety cotter pin. Installation of this part is carried out by anchoring with a ceiling pin or a knock-in anchor.
Non-standard lengths up to 3000 mm can be purchased on request.
The actual weight of the products may vary within +/- 5% according to ČSN EN 10143.
| Order No. | Name | Thickness | Load | Package | Weight |
|---|---|---|---|---|---|
| TMD-0690 | Nonius upper part - 0140 mm | 1.00 mm | 0.40 kN | 100 pcs | 3.20 kg |
| TMD-0180 | Nonius upper part - 0240 mm | 1.00 mm | 0.40 kN | 100 pcs | 4.90 kg |
| TMD-0181 | Nonius upper part - 0340 mm | 1.00 mm | 0.40 kN | 100 pcs | 6.90 kg |
| TMD-0182 | Nonius upper part - 0440 mm | 1.00 mm | 0.40 kN | 100 pcs | 8.60 kg |
| TMD-0183 | Nonius upper part - 0540 mm | 1.00 mm | 0.40 kN | 100 pcs | 9.30 kg |
| TMD-0184 | Nonius upper part - 0640 mm | 1.00 mm | 0.40 kN | 100 pcs | 11.0 kg |
| TMD-0185 | Nonius upper part - 0740 mm | 1.00 mm | 0.40 kN | 100 pcs | 12.70 kg |
| TMD-0186 | Nonius upper part - 0840 mm | 1.00 mm | 0.40 kN | 100 pcs | 14.20 kg |
| TMD-0187 | Nonius upper part - 0940 mm | 1.00 mm | 0.40 kN | 100 pcs | 16.10 kg |
