Nonius connecting piece
The component is intended for the installation of the Nonius suspension system, where higher load capacity and fire resistance are required.
This part is used as a connecting element of the Nonius set for fixed building structures in a horizontal system. It is manufactured by pressing galvanized rolled sheet steel with a thickness of 1.00 mm. Nonius hangers are used in systems where higher load capacity, fire resistance, and buckling strength are required. The set always consists of a top part, a bottom part, and a safety pin. The element serves as a connector for two Nonius parts of the same width that cannot be joined otherwise – for example, a top part and an extension piece.
The actual weight of the products may vary within +/- 5% according to the ČSN EN 10143 standard.
| Order No. | Name | Thickness | Load | Packaging | Weight | Pallet |
|---|---|---|---|---|---|---|
| TMD-0194 | Nonius connecting piece - 100 mm | 1.00 mm | 0.40 kN | 100 pcs | 1.80 kg | 20,000 pcs |
| TMD-2110 | Nonius connecting piece - 170 mm | 1.00 mm | 0.40 kN | 100 pcs | 3.75 kg | 10,800 pcs |
