Nonius bracket for UA 50
The element is intended for installation in the Nonius suspension system, for assembling constructions requiring fire resistance and higher load capacity. The element is used when installing steel profiles of the UA series.
The lower part of the Nonius set is used as an anchoring component for securing UA 50 steel drywall profiles to the solid building structure in a horizontal system. It is manufactured by stamping galvanized rolled sheet with a thickness of 0.70 mm. Nonius hangers are used in systems requiring higher load capacity, fire resistance, and buckling strength. The set always consists of an upper part, a lower part, and a safety pin. Installation of this part is done by bending around the profile and then securing it to the upper part.
The actual weight of the products may vary within +/- 5% according to the ČSN EN 10143 standard.
| Order No. | Name | Thickness | Packaging | Weight | Pallet |
|---|---|---|---|---|---|
| TMD-5055 | Nonius lower part bracket UA 50/40 | 0.70 mm | 100 pcs | 2.15 kg | 6,000 pcs |
